查看內容
特勞鋼TOOLOX33沖擊韌性等技術參數中英對照表
特勞鋼TOOLOX33沖擊韌性等技術參數
| 硬度 | HBW 275-325 | HBW 275-325 |
| 沖擊韌性 |
測試溫度20℃ 板材縱向夏比V型缺口沖擊試驗 沖擊能（最低）J ≤130mm 35 鍛件厚度方向夏比缺口沖擊試驗 沖擊能（最低）J ≤130mm 35 |
Test temperature 20 °C Impact energy, Charpy-V-test for plate, transverse direction; min J ≤ 130 mm 35 Impact energy, Charpy-V-test for forged bar, thickness direction; min J > 130 mm 35 |
| 超聲波測試 |
超聲波探傷要求根據 EN10160(軋板) EN10228-3(鍛件) 額外要求均根據SSAB標準V6版 |
Ultrasonic inspection is carried out according to: EN 10 160 (rolled plates) EN 10228-3 (forged bars) with extra demands according to specifcation SSAB V6 |
| 蝕刻 |
TOOLOX 33滿足NADCA#207-2006 的蝕刻要求 |
Toolox 33 fulfls the etching requirements of NADCA # 207-2006 |
| 尺寸 |
提供的TOOLOX 33鋼板厚度為5-130mm， 或者是厚度為150-300mm的鍛造材料。 |
Toolox 33 is supplied as plate in thicknesses between 5 - 130 mm, or as forged bars in thicknesses between 150 - 300 mm. |
| 交貨條件 | 經過至少590℃調質處理 | Quenched and tempered at a minimum temperature of 590 ?C |
| 熱處理 |
TOOLOX33 無需進一步的熱處理。 如果SSAB Oxelosund AB交付的 TOOLOX33 經過超過590℃的熱處理， 將不保證鋼的性能。 |
Toolox 33 is not intended for further heat treatment. If Toolox 33 is heated above 590 ?C after delivery from SSAB Plate no guarantees for the properties of the steel are given. |
| 氮化/涂層 |
允許在低于590℃下進行 氮化處理或者表面涂層。 |
Nitriding or surface coating may be carried out if the temperature is below 590 °C. |
| 測試 |
測試依據是EN 10 025和 EN ISO 6506-1硬度在原始 表面之下0.5-2mm磨過的平面上測量。 |
Testing according to EN 10 025 and EN ISO 6506-1. Hardness is measured on a milled surface 0.5 - 2 mm below the original surface. |
| 公差 |
長寬厚方向和平整度的公差均根據 “SSAB軋板廠工具鋼新尺寸和公差”標準。 鍛件圓棒符合DIN 7527 |
Thickness, length, width and ?atness tolerances according to “Dimension program and tolerances for new rolling of tool steel plates from SSAB Plate”. Forged bars; According to DIN 7527. |
| 表面質量 |
SSAB Oxelosund AB交付的鋼板符合以下要求 ——無銑削痕跡 ——無補焊 ——表面缺陷深度不允許超過定單的規定 鍛件圓棒 符合DIN 7527 |
On delivery from SSAB Plate the plate meets the following specifcations: - free from mill scale - not repair welded - surface defects below the nominal ordered thickness are not permitted. Forged bars according to DIN 7527. |
更多關于耐沖擊鋼TOOLOX33技術參數等詳情請掃描下方【二維碼】，大滿金屬將為您提供最詳細的TOOLOX33材料資料。